Hello, upload to my bbs is fast but download is like the old modem speed. Is there anything to do to speed up the download speed?
/sandman

Make sure telnetd.device is setup using the following speed:
Top speed should be = 19200

Black Beard wrote:Make sure telnetd.device is setup using the following speed:
Top speed should be = 19200

I have the following setup:
SYS:Internet/genesis/db/telnetd-device.conf
1541 3 pacerate 19200 255.255.255

SYS:internet/genesis/INTERNAL_UNIT.info
SERIAL.BAUD=19200
SERIAL.DRIVER=telnetd.device
SERIAL.UNIT=0

bbs:nodex/serial/INTERNAL_UNIT.info (X is node number)
SERIAL.UNIT=X
SERIAL.BAUD=19200
SERIAL.DRIVER=telnetd.device

I have found the telnetd-device.conf files in several places on sys:internet/genesis
I made the same settings to all the files, but still upload is fast but download is slow.

EDIT: found one more telnetd-device.conf in bbs:/amitcp/db
Changed that one too but it didn't help.

EDIT2: I had to clean upp the environment to be sure about which files was used. So the setup is like this:

SYS:Internet/genesis/db/telnetd-device.conf
1541 3 pacerate 19200 255.255.255
Using sys:devs/telnetd.device version 1.95

bbs:nodex/serial/INTERNAL_UNIT.info (X is node number)
SERIAL.UNIT=X
SERIAL.BAUD=19200
SERIAL.DRIVER=telnetd.device

Upload:


Download:


Any idea what's wrong?
/Sandman

I just remembered people having problems with certain terminal programs.
I personally use Zoc7 for windows because it has the best batch uploading/downloading features.
Demo it and see if it helps.

Hi, it did not help with zoc7, still upload is fast but download slow.
What is the reason with the 19200 top speed?

I tested to chage it on node1 to 921600 in:
bbs:node1/serial/INTERNAL_UNIT.info
SERIAL.UNIT=1
SERIAL.BAUD=921600
SERIAL.DRIVER=telnetd.device

SYS:Internet/genesis/db/telnetd-device.conf
1541 3 pacerate 921600 255.255.255

Now both up/download is fast with both syncterm and soc7, also installed xprzmodem.library v3.51.

I might get into other problems if I have it higher than 19200?

/sandman

Uploads/downloads were unstable at faster speeds.
A lot of errors and batch transfers failing.
If it works for you, continue to monitor it and see how it goes.

Also, are you transferring over the internet or local lan?
You should have someone else test it from the outside at 19200 just in case.

I had a friend to test both download & upload over the internet, it went well no crc errors and good speed, he had 95000 cps in download speed. And the files was ok to unpack without any errors. He used Syncterm, I have tried both syncterm och zoc7 on the local lan and it have been ok.
I'll leave the settings like this for a while to see if there is any other problems showing up.